HEOS Power Usage

HEOS 1 HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.5W0.3W*
WiFi4.1W0.3W*
Bluetooth4.1W0.3W*
USB4.5W0.3W*
All Ports4.5W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connections

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 3 HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.7W0.3W*
WiFi3.9W0.3W*
Bluetooth3.9W0.3W*
USB4.3W0.3W*
All Ports4.3W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 5 HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.5W0.3W*
WiFi5.0W0.3W*
Bluetooth5.1W0.3W*
USB5.4W0.3W*
All Ports5.4W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS 7 HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.9W0.3W*
WiFi5.6W0.3W*
Bluetooth5.4W0.3W*
USB5.9W0.3W*
All Ports5.9W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS Amp HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.5W0.3W*
WiFi4.1W0.3W*
Bluetooth3.8W0.3W*
USB4.2W0.3W*
All Ports4.4W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS HomeCinema

Power Consumption
Soundbar

Network PortQuick Start ModeDeep Standby Mode
Ethernet4.8W0.49W*
WiFi4.3W0.49W*
BluetoothN/AN/A
USB5.7W0.49W*
HDMI IN4.8W0.49W*
HDMI OUT (ARC)5.2W0.49W*
OPT4.0W0.49W*
COAX3.9W0.49W*
All Ports5.9W0.49W*
Default Time to Enter
Soundbar

Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
BluetoothN/AN/A
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
HDMI IN20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC)20 min of no playback, no operation, and no network activity after TV is put into standby60 min in QSM with no HDMI connection and no network connection
OPT20 min of no playback, no operation, and no network activity after OPT device is put into standby60 min in QSM with no network connection
COAX20 min of no playback, no operation, and no network activity after COAX device is put into standby60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after connected devices are put into standby60 min in QSM with no HDMI connections and no network connection
Subwoofer

Network PortQuick Start ModeDeep Standby Mode
Wireless0.76W-
Subwoofer

Network PortQuick Start Mode (QSM)Deep Standby Mode
Wireless10 sec after soundbar is put into QSM or Deep Standby Mode-

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS AVR

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet4.2W0.4W*
WiFi4.5W0.4W*
Bluetooth4.3W0.4W*
USB4.8W0.4W*
HDMI IN4.6W0.4W*
HDMI OUT (ARC)4.5W0.4W*
OPT4.3W0.4W*
COAX4.3W0.4W*
All Ports5.6W0.4W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
HDMI IN20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC)20 min of no playback, no operation, and no network activity after TV is put into standby60 min in QSM with no HDMI connection and no network connection
OPT20 min of no playback, no operation, and no network activity after OPT device is put into standby60 min in QSM with no network connection
COAX20 min of no playback, no operation, and no network activity after COAX device is put into standby60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after Bluetooth connection is disconnected and connected devices are put into standby60 min in QSM with no HDMI connections and no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS BAR

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet3.7W0.4W*
WiFi4.9W0.4W*
Bluetooth3.7W0.4W*
USB4.1W0.4W*
HDMI IN4.3W0.4W*
HDMI OUT (ARC)3.8W0.4W*
OPT3.8W0.4W*
COAX3.8W0.4W*
All Ports5.9W0.4W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
Bluetooth20 min of no playback, no operation, and no network activity after disconnecting Bluetooth connection60 min in QSM with no network connection
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
HDMI IN20 min of no playback, no operation, and no network activity after HDMI device and TV are put into standby60 min in QSM with no HDMI connections and no network connection
HDMI OUT (ARC)20 min of no playback, no operation, and no network activity after TV is put into standby60 min in QSM with no HDMI connection and no network connection
OPT20 min of no playback, no operation, and no network activity after OPT device is put into standby60 min in QSM with no network connection
COAX20 min of no playback, no operation, and no network activity after COAX device is put into standby60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity after Bluetooth connection is disconnected and connected devices are put into standby60 min in QSM with no HDMI connections and no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS SUBWOOFER

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet2.9W0.3W*
WiFi3.4W0.3W*
BluetoothN/AN/A
USB3.7W0.3W*
All Ports4.0W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
WiFi20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
BluetoothN/AN/A
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, no AUX cable plugged-in, and no network activity60 min in QSM with no network connection

In order to deactivate the wireless network port: establish an Ethernet connection, go to Settings > My Devices > choose_device > Advanced > set Wireless Power Saving to ON. In order to reactivate the wireless network port, set Wireless Power Saving to OFF.
*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.

HEOS DRIVE HS2

Power Consumption
Network PortQuick Start ModeDeep Standby Mode
Ethernet28.6W0.3W*
BluetoothN/AN/A
USB29.0W0.3W*
All Ports30.7W0.3W*
Default Time to Enter
Network PortQuick Start Mode (QSM)Deep Standby Mode
Ethernet20 min of no playback, no operation, and no network activity60 min in QSM with no network connection
BluetoothN/AN/A
USB20 min of no playback, no operation, and no network activity after stopping playback at the end of queue60 min in QSM with no network connection
All Ports20 min of no playback, no queue, no operation, and no network activity60 min in QSM with no network connection

*This HEOS device cannot be controlled or operated without a connection to the indicated network port, therefore network or deep standby modes are inappropriate for the intended use of this port.
It has four independent netwark module.
The output-stage amplifier operators as a matrix for the four independent reproduction.
This is a professional product for CI.
In other words, shutting down the network port unless the user intends it will betray users' expectations. For that reason CE declaration excludes Lot 26 conformance.

We use cookies to give you the best possible experience on our site. By continuing to use the site you agree to our use of cookies. Find out more.